U POWER H-PCON

An alternative to the Rotary Diesel UPS is the HITZINGER Clean Power unit that provides a conditioned source of supply to the consumer and provides all the benefits of a standard DRUPS whilst in stand-by operation including power factor correction, filtering of harmonics, protection against voltage peaks / drops and frequency errors.

Simplified Description – During standby operation, the alternator and KIN module act like a synchronous motor on the mains, together with the coupling choke, and provides the clean source of power.

U POWER H-PCON
U POWER H-PCON

Technical data

Power classes

  • Power ratings from 100 kVA to 2500 kVA
  • Voltages from 400 V to 11 kV
  • Frequencies of 50 Hz, 60 Hz
  • Utilisation of the autonomous time for maximum temporary bridging

Variants

  • Stationary setup
  • Container version
  • Enclosed version

Environment

  • Ambient temperature: -30 °C to +50 °C
  • Noise level: up to 45 dB(A) at 3 m

Standards

  • IEC 60034-1
  • IEC / EN 88528-11
  • other standards (e.g. UIC, EN, IEC, ISO, UL) to requirements

Technical highlights

  • Network stabilisation and filtering to protect consumers from harmonic oscillations, voltage peaks, voltage drops and frequency faults.
  • U POWER systems work with voltages of up to 11 kV independently, which offers benefits such as low losses and greater reliability thanks to minimisation of components and absence of step-up transformers, among others.
  • Preventive system protection for prolonged service life, system monitoring, coil temperature monitoring, vibration monitoring, etc.
  • Reduced downtimes/maintenance intervals thanks to automatic regreasing devices, with the advantage of a completely contactless excitation device (“brushless design”) further reinforced on the alternator; tropical special coatings
  • As a general contractor, we are able to realise complete turnkey projects, including aspects such as engineering, execution planning, production with subsequent factory approval, delivery and local installation.
  • A design with an optimised level of efficiency for minimal losses in standby mode.
  • EMC-tested, long-life modular controller, 15.4-inch touchpanel with intuitive user menu navigation.

Variants and options

  • Redundancy variants (system-/controller-redundant,..)
  • Comprehensive communications interfaces (PROFIBUS, PROFINET, MODBUS, etc. )
  • Circuit breaker variants including 3-pole, 4-pole, plug-in technology,…
  • Remote maintenance access to information on the current system state via W-LAN